Powder-coated steel: Durable and easy to clean, wipe with a soft dry cloth to clean. Do not use chemical cleaners or harsh abrasives and avoid using water. Leather: Avoid placing leather in direct sunlight or extreme heat. Clean using the suds from household soap flakes. Mix 50 ml. soap flakes to one litre of hot water. When the water is room temperature, apply the foam over the leather with a soft cloth. Avoid soaking. When dry, polish the leather with a clean cotton cloth. • Avoid contact with sharp objects. • Absorb spills immediately with a clean, dry cloth. • Vacuum regularly with a soft brush to remove dust. • Never use detergents, ammonia, oils, polish or varnish. Marble: liquids such as coffee, tea and juice should never be left to dry on marble as they will damage the surface. Never place acidic fruit on a marble surface and avoid using harsh and abrasive chemicals and corrosives. To avoid everyday damage, use trivets, coasters and placemats to protect from hot tableware or anything that may scratch or stain the surface. If an accident occurs, act quickly and blot spills with a paper towel. Do not rub as this will spread the liquid. Use a pH-neutral detergent or stone soap to prevent the stain from drying out or absorbing into the stone. Dust once or twice weekly with a soft microfibre cloth. Wash periodically with a cloth dampened with warm water, adding a small squeeze of pH-neutral dishwashing liquid if necessary. Remove any residue with a clean, damp cloth. Do not use abrasive cloths, sponges or wire pads which may scratch the surface. We recommend using a specialist natural stone soap to treat difficult stains. Never use acidic detergents (such as bathroom cleaners) or detergents containing bleach. Thoroughly rinse with clean water to remove all traces of soap. Please note, marble sealer must be maintained every 8–12 months depending on the amount of use.